New Temperature Control Unit : Water, Model: VT-275-LXG

Overview
  • Water temperature control units circulate temperature stabilized water through the process for process temperature control.
  • The temperature control range of this unit is 30°F – 250°F.
  • A pump circulates water through the process. A heater and a cooling valve work together to control the water temperature.
  • This temperature control unit requires a plant water supply source.
  • Temperature control units are portable, built on casters to easily move the unit between processes.
Specifications
VT-275-LXG (1)
  • Heater (2)
  • kW : 10
  • Process Pump
  • HP : 3/4
  • GPM : 35
  • PSI : 30
  • Full Load Amperage (3)
  • 230/3/60 : 27.8
  • 460/3/60 : 13.9
  • 575/3/60 : 11.6
  • Connection Sizes
  • To Process : 1-1/4″
  • From Process : 1-1/4″
  • Water Supply : 1/2″
  • Drain : 1/2″
  • Dimensions
  • Height : 28-1/4″
  • Width : 12-1/2″
  • Depth : 19-1/2″
  • Weight (5)
  • Shipping : 200 lbs

Specification Notes:

  • 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
  • 2. Derate heater output by 25% for 208/3/60 operation.
  • 3. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring. Not for construction. Consult factory for power requirements of unit as configured and on selected options.
  • 4. Consult factory for 50HZ operation.
  • 5. Unit weight crated for shipment.
Features
  • Process Pump
  • 3/4 HP process pump
  • Stainless steel shaft
  • Horizontal motor extends bearing and seal life
  • ODP (open drip proof) motor
  • Pump seal flush line
  • Custom designed impeller and casing
  • High grade mechanical contactor with over current, phase loss and short circuit protection
  • Cooling Vavle
  • PVT™ Solenoid Valve
  • Pulsed by the microprocessor controller
  • Heater
  • 10 kw
  • Stainless steel sheath
  • Built-In flange for bolt-in mounting
  • Mechanical contactor
  • Control Instrument
  • Controls temperature from
    30°F to 300°F
  • Cabinetry & Frame
  • Stainless steel panels
  • Hinged electrical cabinet door
  • Lift-off mechanical cover
  • Portable, on castors
  • System Limits
  • Water supply pressure switch
  • Process pump motor overload protection
  • Process pressure relief valve
  • High temperature limit protection
  • Control circuit fuse
  • Electrical
  • DIN rail mounted electrical components
  • UL approved components
  • Nema 1 electrical construction
  • Pressure Gauges
  • To process
  • From process
  • Heating & Cooling Cylinders
  • Twin cylinders – separate heating and suction tanks
  • Made from cast iron by custom molds
  • Reinforced bosses for process and ancillary connections
  • NPT process connections
  • Each cylinder is flanged mounted to the pump casing
  • Warranties
  • Lifetime on the pump seal
  • 4 Years on the control instrument
  • 2 Years on the cooling valve
  • 2 Years on the mechanical system
Options
  • Control Instrument
  • SPI communications cable – 20′
  • ‘300°F’ Instrument Upgrade
    Changes Model to VT-275-LXG
  • ‘LS’ Control Instrument
    Changes Model to VT-275-LS
  • ‘LXT’ Control Instrument
    Changes Model to VT-275-LXT
  • Process Pump
  • 1 HP @ 45 GPM
    Changes Model to VT-2100-LXG
  • 1-1/2 HP @ 65 GPM
    Changes Model to VT-2150-LXG
  • 2 HP @ 75 GPM
    Changes Model to VT-2200-LXG
  • 3 HP @ 80 GPM
    Changes Model to VT-2300-LXG
  • 5 HP @ 90 GPM
    Changes Model to VT-2500-LXG
  • 7-1/2 HP @ 100 GPM
    Changes Model to VT-2750-LXG
  • Heater
  • 16 kW
    Changes Model to VT-375-LXG
  • 24 kW
    Changes Model to VT-475-LXG
  • 34 kW
    Changes Model to VT-575-LXG
  • Alarms
  • High dB Audible Alarm
  • Visual / audible beacon
  • Electrical
  • Power Disconnect Switch
  • Unit
  • Total Non-Ferrous Unit
  • Closed Circuit Cooling
  • Closed Circuit Cooling With Expansion Tank
  • Mold Purge
  • Dual Zone dolly with water manifold and/or single electrical connection
  • Stacking Stand with water manifold and/or single electrical connection
  • Cabinetry & Frame
  • Rear Panel Cover
Control Instrument
  • Temptek Instrument LXG Series
  • LXG Series
  • Simple menu driven controller
  • LCD display
  • Home screen includes continuous setpoint and to process temperature
  • % Heating or Cooling indication on home screen
  • Standard shut down pump seal cooling feature
  • User configurable automatic start-up venting
  • Out-of-spec alarm including standard audible signal
  • Selectable SPI or Modbus RTU communication
  • Optional Modbus TCP communication
  • Drop in replacement for older Advantage LE series control instrument
  • For process fluid temperature up to 250°F
  • Operates exclusive AVT modulating cooling valve
  • Selectable °F or °C temperature display
  • Optional : High temperature fluid capability to 300°F
  • Optional : Flow meter with flow rate display
SKU: T0018 Category: