New Air-Cooled Water Chiller, Model: CFD-5A

• Capacity
• (2) Tons : 4.9
• kW : 17.2
• Compressor
• HP : 5
• Type : Digital Scroll
• Process Pump
• HP : 2
• GPM : 12
• PSI : 52
• Type : Centrifugal
• Construction : Stainless Steel
• Automatic Low Flow Bypass: : Standard
• Air-Cooled Condenser
• Type : Fan
• CFM : 5,000
• (3) Ambient : 95°F
• Refrigerant
• Type : R-410A
• Full Load Amperage (4)
• 230/3/60 : 34
• 460/3/60 : 17
• 575/3/60 : 14
• Reservoir Capacity
• Holding : 25 gal
• Lid : Standard
• Auto Make-Up : Optional
• Process Connections
• To Process : 1-1/4″
• From Process : 1-1/4″
• Make-Up : 1/2″
• Dimensions
• Height : 60″
• Width : 34″
• Depth : 40″
• Weight (5)
• Shipping : 800 lbs

Specification Notes:

• 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
• 2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ ” 115°F condensing temperature. Capacities may be +/- 5% as reserved by the compressor manufacturer. Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
• 3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
• 4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
• 5. Approximate unit weight crated for shipment.

• Refrigerant Circuit
• Air-cooled condenser with finned tubes
• Propeller fan(s) induced air flow
• Referant sight glass with moisture indicator
• Filter-drier
• Thermostatic expansion valve
• R410A refrigerant
  – Non-Ozone depleting
  – Low global warming impact
• Brazed plate evaporator
  – Stainless steel plates
  – Copper brazing material
• Liquid line solenoid valve
• Digital Scroll compressor
• Energy efficient capacity control from 20% – 100%
• Coolant Circuit
• Insulated non-ferrous reservoir
  (tank lid is standard on this model)
• Reservoir level sight glass
• Standard NPT process fittings
• High flow centrifugal pump

• Electrical
• Nema 1 control cabinet
• Process pump motor starter
• Compressor contactor
• Power entry terminal block
• Branch Circuit Fusing
• System Limit Devices
• High refrigerant pressure
• Low refrigerant pressure
• Process pump motor overload
• Frame Construction
• Castors – for portability
• Designed for indoor installation
• Powder coated steel upright frame
• Glavanized steel cross frame
• Powder coated steel cabinetry
• Lift-off side panels
• Thermoformed ABS front fascia
• Warranty
• 1 year covering parts and labor
• Pressure Gauges
• Refrigerant high pressure
• Refrigerant low pressure
• Coolant pressure

• Refrigerant Circuit
• Centrifugal Blower
• Damper Assembly (used with centrifugal blowers)
• Air Inlet filter and protection screen
• Electrical
• Emergency Stop Button
• UL listed electrical sub panel

• Coolant Circuit
• Overhead Piping Kit
• Reverse Flow … gravity return to open tank
• Process Line Shut Off Valves
• Larger process pumps
• Warranty
• Extended Compressor Warranty

• 
• CFD Series
• Accurate control
• Automatically provides energy efficient capacity modulation from 20 – 100%
• Large & Bright LED temperature display
• Digital Setpoint selection with soft touch keys
• Illuminated Chiller On / Off switch
• Compressor On light
• Basic chiller diagnostics with Refrigeration Fault light
• Capacity control light
• Custom control software included to operate digital capacity control feature
• Accurate control
• Automatically provides energy efficient capacity modulation from 20 – 100%
• Large & Bright LED temperature display
• Digital Setpoint selection with soft touch keys
• Illuminated Chiller On / Off switch
• Compressor On light
• Basic chiller diagnostics with Refrigeration Fault light
• Capacity control light
• Custom control software included to operate digital capacity control feature