New Air-Cooled Water Chiller, Model: CF-2A

Overview
  • Portable chillers use mechanical refrigeration to cool recirculated fluids that support industrial process cooling applications.
  • Portable chillers include an internal pumping system and reservoir system.
  • Portable chillers can be moved between use points as needed.
  • Air-Cooled chillers use indoor ambient air to dissipate the heat from the refrigeration system.
Specifications
CF-2A (1)
  • Capacity
  • (2) Tons : 2
  • kW : 7.0
  • Compressor
  • HP : 2
  • Type : Scroll
  • Process Pump
  • HP : 3/4
  • GPM : 4.8
  • PSI : 32
  • Type : Centrifugal
  • Construction : Stainless Steel
  • Automatic Low Flow Bypass: : Standard
  • Air-Cooled Condenser
  • Type : Fan
  • CFM : 2,000
  • (3) Ambient : 95°F
  • Refrigerant
  • Type : R-410A
  • Full Load Amperage (4)
  • 230/3/60 : 17
  • 460/3/60 : 8.5
  • Reservoir Capacity
  • Holding : 7.5 gal
  • Lid : Optional
  • Auto Make-Up : Optional
  • Process Connections
  • To Process : 3/4″
  • From Process : 3/4″
  • Dimensions
  • Height : 30″
  • Width : 37″
  • Depth : 24″
  • Weight (5)
  • Shipping : 415 lbs

Specification Notes:

  • 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
  • 2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ ” 115°F condensing temperature. Capacities may be +/- 5% as reserved by the compressor manufacturer. Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
  • 3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
  • 4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
  • 5. Approximate unit weight crated for shipment.
Features
  • Refrigerant Circuit
  • Air-cooled condenser with finned tubes
  • Propeller fan(s) induced air flow
  • Referant sight glass with moisture indicator
  • Filter-drier
  • Thermostatic expansion valve
  • R410A refrigerant
    – Non-Ozone depleting
    – Low global warming impact
  • Scroll Compressor
  • Hot gas bypass down to 50% capacity
  • Brazed plate evaporator
    – Stainless steel plates
    – Copper brazing material
  • Liquid line solenoid valve
  • Coolant Circuit
  • Insulated non-ferrous reservoir
    (tank lid is standard on this model)
  • Reservoir level sight glass
  • Standard NPT process fittings
  • High flow centrifugal pump
  • Electrical
  • Nema 1 control cabinet
  • Process pump motor starter
  • Compressor contactor
  • Factory installed 10′ power cord
  • Power entry terminal block
  • Branch Circuit Fusing
  • System Limit Devices
  • High refrigerant pressure
  • Low refrigerant pressure
  • Process pump motor overload
  • Frame Construction
  • Castors – for portability
  • Designed for indoor installation
  • Powder coated steel upright frame
  • Glavanized steel cross frame
  • Powder coated steel cabinetry
  • Lift-off side panels
  • Warranty
  • 1 year covering parts and labor
  • Pressure Gauges
  • Refrigerant high pressure
  • Refrigerant low pressure
  • Coolant pressure
Options
  • Refrigerant Circuit
  • Air Inlet filter and protection screen
  • Electrical
  • UL listed electrical sub panel
  • Coolant Circuit
  • Overhead Piping Kit
  • Reverse Flow … gravity return to open tank
  • Process Line Shut Off Valves
  • Larger process pumps
  • Warranty
  • Extended Compressor Warranty
Control Instrument
  • Standard CF Series Control Instrument
  • CF Series
  • Continuous To Process temperature display
  • Selectable Setpoint temperature display
  • Illuminated ON/OFF power switch
  • Soft touch Setpoint selection keys
  • Illuminated Chiller On / Off switch
  • Bright and easy-to-read LED Temperature display window
  • Basic chiller diagnostics with Refrigeration Fault light
  • Machine Status with Compressor and Capacity Control indicating lights
  • Basic Machine Diagnostics with Refrigeration Fault indicating light
  • Continuous To Process temperature display
  • Selectable Setpoint temperature display
  • Illuminated ON/OFF power switch
  • Soft touch Setpoint selection keys
  • Illuminated Chiller On / Off switch
  • Bright and easy-to-read LED Temperature display window
  • Basic chiller diagnostics with Refrigeration Fault light
  • Machine Status with Compressor and Capacity Control indicating lights
  • Basic Machine Diagnostics with Refrigeration Fault indicating light
SKU: T0026 Category: